https://distance-surveillance.ca/ds-k1107e-hikvision-card-reader
Key Features:
- Fully compatible with Hikvision Access Controller DS-K2600 Series
- With LED Reader Status Indicator
- Tamper-Resistant Alarm
- Supports EM/Mifare Cards (Options)
- RS-485 and Wiegand (DIP Switch)
| System Parameters | ||
|---|---|---|
| Processor: | | | 32-bit |
| Card Reading Distance: | | | ≥5 cm |
| ID Settings: | | | Setting by the DIP Switch on the Main Board |
| General | ||
| Key Board: | | | Without Keypad |
| Power Supply: | | | 12VDC |
| Communication Interface: | | | RS-485 / Wiegand (DIP Switch) |
| Audio Alert: | | | Beeper |
| Power Consumption: | | | ≤2W |
| LED Indicator: | | | Power Indicator; Status LED Indicator |
| Working Temperature : | | | -20°C to +65°C (-4°F to +149°F) |
| Working Humidity: | | | 10% to 90% (Non-Condensing) |
| Dimensions (L×W×H): | | | 115×44×22mm (4.53×1.73×0.87inch) |
| Protection Level: | | | IP 65 |
| Installation: | | | Wall mounting with screws. The Gang Box is not supported. |
| Temper-Proof: | | | Support |
| System Parameters | ||
|---|---|---|
| Processor: | | | 32-bit |
| Card Reading Distance: | | | ≥5 cm |
| ID Settings: | | | Setting by the DIP Switch on the Main Board |
| General | ||
| Key Board: | | | Without Keypad |
| Power Supply: | | | 12VDC |
| Communication Interface: | | | RS-485 / Wiegand (DIP Switch) |
| Audio Alert: | | | Beeper |
| Power Consumption: | | | ≤2W |
| LED Indicator: | | | Power Indicator; Status LED Indicator |
| Working Temperature : | | | -20°C to +65°C (-4°F to +149°F) |
| Working Humidity: | | | 10% to 90% (Non-Condensing) |
| Dimensions (L×W×H): | | | 115×44×22mm (4.53×1.73×0.87inch) |
| Protection Level: | | | IP 65 |
| Installation: | | | Wall mounting with screws. The Gang Box is not supported. |
| Temper-Proof: | | | Support |
| Type | EM |