DS-K1107E Hikvision Card Reader

TOP

$96.60
   


Description

Key Features:

- Fully compatible with Hikvision Access Controller DS-K2600 Series

- With LED Reader Status Indicator

- Tamper-Resistant Alarm

- Supports EM/Mifare Cards (Options)

- RS-485 and Wiegand (DIP Switch)


System Parameters
Processor: | 32-bit
Card Reading Distance: | ≥5 cm
ID Settings: | Setting by the DIP Switch on the Main Board
General
Key Board: | Without Keypad
Power Supply: | 12VDC
Communication Interface: | RS-485 / Wiegand (DIP Switch)
Audio Alert: | Beeper
Power Consumption: | ≤2W
LED Indicator: | Power Indicator; Status LED Indicator
Working Temperature : | -20°C to +65°C (-4°F to +149°F)
Working Humidity: | 10% to 90% (Non-Condensing)
Dimensions (L×W×H): | 115×44×22mm (4.53×1.73×0.87inch)
Protection Level: | IP 65
Installation: | Wall mounting with screws. The Gang Box is not supported.
Temper-Proof: | Support

System Parameters
Processor: | 32-bit
Card Reading Distance: | ≥5 cm
ID Settings: | Setting by the DIP Switch on the Main Board
General
Key Board: | Without Keypad
Power Supply: | 12VDC
Communication Interface: | RS-485 / Wiegand (DIP Switch)
Audio Alert: | Beeper
Power Consumption: | ≤2W
LED Indicator: | Power Indicator; Status LED Indicator
Working Temperature : | -20°C to +65°C (-4°F to +149°F)
Working Humidity: | 10% to 90% (Non-Condensing)
Dimensions (L×W×H): | 115×44×22mm (4.53×1.73×0.87inch)
Protection Level: | IP 65
Installation: | Wall mounting with screws. The Gang Box is not supported.
Temper-Proof: | Support
Specification
  • TypeEM
Type EM

There are no reviews for this product.

Write a review
Note: HTML is not translated!
Captcha

Newsletter Subscribe:

markerLocate Us on Map